Switch On And Off; Preselecting The Speed - Flex L602VR Manual De Instrucciones

Switch on and off

Brief operation without engaged
switch rocker:
– Press and hold down the switch (7).
– To switch off, release the switch.
Continuous operation with engaged
switch rocker:
– Press and hold down the switch (7).
– To lock into position, hold down the
locking button (6) and release the
switch.
– To switch off, briefly press and release
the switch (7).
16
Note
Following a power failure, the switched on
power tool does not restart.

Preselecting the speed

– To set the operating speed, move the
dial (3b) to the required value.
– Gently press the switch (7) to accelerate
the power tool up to the preselected
speed.
Caution!
Risk of injury due to destruction of the tool.
Use the appropriate tool for the job.
Note
If an overload or overheating occurs during
continues operation, the power tool
automatically reduces the speed until the
power tool has cooled down adequately.
Polisher L 602VR