Switch On And Off; Preselecting The Speed - Flex FS 3403 VRG Manual De Instrucciones

Switch on and off

Brief operation without engaged switch
rocker:
– First press the starting lockout.
Then press and hold down the switch.
Release the starting lockout.
– To switch off, release the switch.
Continuous operation with engaged switch
rocker:
– First press and hold down the starting
lockout and then the switch.
– To lock into position, hold down the
locking button and release the switch.
Release the starting lockout.
16
Renovation milling machine FS 3403 VRG
– To switch off, briefly press and release
the switch.
Note
Following a power failure, the switched on
power tool does not restart.

Preselecting the speed

To set the operating speed, move the
dial (8) to the required value.
Note
If an overload or overheating occurs during
continues operation, the power tool
automatically reduces the speed until the
power tool has cooled down adequately.