Operating Instructions; Switching On And Off - Flex LLK 1503 VR Instrucciones De Funcionamiento Originales

LLK 1503 VR

Operating instructions

t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
Before switching on the power tool
 Unpack the electric power tool and check
that no parts are missing or damaged.
Changing the sanding disc
 Pull out the mains plug.
 Open FixTec quick-clamping nut.
– Open lock on the quick-clamping nut (1.).
– Turn quick-clamping nut anti-clockwise,
holding the grinding disc firmly (2.).
 Remove grinding disc (3.).
 Attach new grinding disc (4.).
 Screw on quick-clamping nut by turning
it clockwise (5.) and close lock (6.).
Swivelling sanding arm
 Loosen the fastening screw and swivel
the sanding arm in the required direction.
The sanding arm may be swivelled by maxi-
mum 30° in order to retain the belt tension.
To change the toothed belt, the sanding arm
is swivelled all the way back by 180° in order
to release the belt tension.

Switching on and off

t^okfkd>
eçäÇ=íÜÉ=ÉäÉÅíêáÅ=éçïÉê=íççä=Äó=íÜÉ=áåëìä~íÉÇ=
Öêáé=ëìêÑ~ÅÉë=çåäó>
Brief operation without engaged
switch rocker:
 Push the switch rocker forwards and hold
in position.
 To switch off the power tool, release
the switch rocker.
19