List Of Parts; Using The Brake - Cosatto Nitty Gritty TO & FRO DUO Manual De Instrucciones

•
Two baskets are provided for the carriage of goods, evenly distributed, up to a maximum weight
of 2kg for each basket.
•
Rear pocket on hoods - maximum weight 200g.
•
Plastic cup holder - maximum weight 0.5kg.
•
Never leave raincovers on indoors, in a hot atmosphere or near a heat source as the baby
could overheat.
•
Ensure all users are familiar with the products operation. It should always open and fold easy.
If it does not, do not force the mechanism - stop and read the instructions.
•
Do not use your pushchair in a manner for which it is not designed.
•
Do not allow your child to climb unassisted into, play with or hang onto your pushchair.
•
Do not use a platform with this pushchair as it may render the pushchair unsafe.
•
Always apply the brakes when the pushchair is stationary. Hold on to your pushchair when
close to moving road vehicles or trains. Even with the brake on the draught from the vehicle
may move the pushchair.
•
Exercise caution when mounting or dismounting a kerb. Remove your child and fold the pushchair
when ascending or descending stairs or escalators.
•
Ensure the folded pushchair is stored away from children so that it does not fall and cause injury.
•
Never carry a third child on your pushchair.
•
This product complies with BS EN 1888:2012.
operation
(see illustrations further on in this booklet)

1 - list of parts

Your pushchair is supplied in one carton and contains:
1. Pushchair (basket & chest pad attached, head pad inserted)
2. Footmuff (Wedge inserted) x2
3. Headhugger x2
4. Hoods
5. Raincover
6. Raincover bag
7. Plastic drinks holder
8. Changing bag (If specified)
2 - opening the pushchair
To open the pushchair, first release the autolocks (a) one on each side which hold the pushchair in
the umbrella position. Now holding the pushchair by its handles, gently lower the front.
To complete the operation: press down on both pedals (b), until you hear the 'click' from the
secondary locking bar (c).
WARNING: Ensure that all locking devices are engaged before use.

3 - using the brake

To apply the brake, press one of the brake levers down firmly with your toe (a). Test the brake is
engaged correctly by trying to push the pushchair forwards for a short distance. To release the
brake, lift any of the levers (b).
NOTE: Always apply brake before placing and removing a child from the pushchair.
4 - using the front wheels
To allow the front wheels to swivel, push down on the locking lever as shown (a). To lock the
wheels into position lift the locking lever up (b) with the wheels in any position and run the
pushchair until you hear each wheel 'click' as they lock in position.