Steelcase Elective Elements - Leg Base Credenza Shipped Assembled Manual De Instrucciones página 5

5.
Flush rear legs to reveals and attach
using the #8 x 375" screws.
6.
Attach rear legs to case using the
predrilled holes and (7) #10 x 1.075"
screws per leg.
Tip: adjust each glide
to an equal height
(start with approximately
1/4" of extension).
Position rear legs
reveals
flush with
5
.
6
5
5
Tip: Make sure that
the torque control drill
is set properly to prevent
stripping of screws.
Page 5 of 24
939568000 Rev D