Getting Started; Using The Tv's Controller (Panel Key); Initial Setup - Samsung 4+ Serie Manual De Usuario

Getting Started

The TV's Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote control.
✎
Some functions which require a PIN code may not be available.
✎
The product colour and shape may vary depending on the model.
✎
Exits the menu when pressing the controller more than 1 second.
✎
When using the controller in the up/down/left/right directions, make sure you do not push the controller in first. If you push
the controller in first it will not move in the up/down/left right directions.
The image is drawn by facing the front side of
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of
electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Setup is available only when the source is set to TV.
✎
If you connect any device to
box automatically. If you do not want to select Set-top box, please select Aerial.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0". If you want to change
the PIN number, use the Change PIN function.
You should do Setup
(MENU
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the
PIN to "0-0-0-0": MUTE
6
English
[PF4000-SH]BN68-04821H-03Cover.indb 6

Using the TV's Controller (Panel Key)

Selecting the Menu
TV Controller
the TV.

Initial Setup

HDMI IN 1(STB) before starting the installation, Channel Source will be changed to Set-top
→ System) again at home even though you did in shop already.
→ 8 → 2 → 4 → POWER (on)
Selecting the Media Play
Selecting a Source
Return
Power off
Function menu
Remote control sensor
2013-07-25 10:44:09