Technical Features - Tramontina CC40M Manual De Uso Y Mantenimiento

Model
CC40M
CC40P
CC45M
CCT45P
CC50M
CC50M2
CC55M
• FREE TECHNICAL TRAINING is available on products purchased from authorised Tramontina
suppliers.
• Cost of oil and gasoline is at the user's own expense.
• The motor is NOT filled with oil. Fill 600 ml SAE 20W50 oil.
• The first oil change should happen after 5 hours of use. Subsequent oil changes should be
done every 25 hours of operation or every 6 months (whichever happens first), except for
models CC50M (without electric start) and CC55M, in which the oil must only be topped off
whenever the level is low, without the need to change. For all models, it is necessary to check
and top off the oil every time the equipment is used, if the oil level is low.
• Use high-quality petrol and do not leave fuel in the tank after use.
• Check cleanliness of air filter periodically, or at least with every oil change.
Use safety
goggles
Read the instruction
manual before using
your brush cutter
20

TECHNICAL FEATURES

Power
rpm Displacement
(hp)
hp
4 3,300 140 cc
hp
3,300 140 cc
4
hp
3,300 140 cc
4
hp
3,300 140 cc
4
hp
3,300 163 cc
6
hp
3,200 159 cc
6
hp
3,300 163 cc
6
QUICK USER'S GUIDE
SYMBOLS
Don't use or leave
equipment in the rain
Keep your distance from
the mower blade when the
engine is running
Cutting
Application / Use
diameter
40 cm Domestic
40 cm Domestic
45 cm Domestic
45 cm Domestic
50 cm Profesional
50 cm Profesional
55 cm Profesional
Gasoline
PARAR/STOP
Wait until all of the machine components
have completely come to a stop before
touching them. The blades keep spinning
after the machine is switched off
Average
consumption
(liters/h)
1 L/h
1 L/h
1 L/h
1 L/h
1 L/h
1 L/h
1 L/h
Oil
Keep people and children away
from the hazard zone
15 meters