Disassembly And Dismantling; Waste Disposal; Residual Risks - Master Trimmers MT Dry 200 Manual De Uso Y Mantenimiento

2. Loosen the two nuts identified in red in the following image and move the support until the desired wheel posi-
tion is reached. Finally, tighten the two nuts to immobilise the unit.

13. Disassembly and dismantling

- Before proceeding with disassembly, all possible power and/or electricity sources must be cut off.
- For disassembly and dismantling operations, use the following personal protective equipment: gloves and protective
glasses.
- Covers, flexible ducts and components made of plastic material (or any non-metallic material) must be disassembled
and disposed of separately.
- The electrical components must be disassembled for reuse, if they are in good condition or, if possible, checked and
recycled.
- Take the components to an authorized recycling centre so that they are recycled and/or disposed of in an environ-
mentally safe way. Recycle unwanted materials instead of disposing of them.

14. Waste disposal

Waste must be disposed of according to the corresponding national regulations.

15. Residual risks

REASON
Not wearing eye
protection
Removing safety devices
or protections
Place the machine on an
irregular surface
Moving the machine
while it is running
DANGER
Expulsion of particles
Mobile parts could trap
clothing and/or limbs
Risk of falling
Risk of falling
www.masterproducts.es
REMAINING RISK
Possible face and eye
injuries
Danger of serious injury or
amputation
Trauma or damage to
equipment
Trauma or damage to
equipment
PREVENTATIVE
MEASURES
Wear protective glasses
Do not remove protective
elements
Ensuring the stability of the
machine
It is forbidden to move the
machine while it is running
31