cecotec CleanFry Infinity 3000 Serie Manual De Instrucciones página 14

ENGLISH
Do not overheat oil, it could cause fire risk. In case of fire,
•
never use water to extinguish a cooking oil fire.
• Never bend, dent or damage the heating elements.
Check the power cord regularly for visible damage. If the
•
cord is damaged, it must be replaced by the official Technical
Support Service of Cecotec in order to avoid any type of
danger.
Always operate and store the appliance on a flat, stable
•
surface.
Make sure the product's handles are properly assembled
•
and locked in place before use.
• The appliance is not intended to be operated by means of
an external timer or a separate remote-control system.
• The surfaces of the appliance become hot during and after
operation. Do not touch while in use. Allow the appliance to
cool at least 30 minutes before handling and use only heat-
resistant tools. Do not use metal tools as they may become hot.
• Always unplug the appliance while not in use, before
cleaning and before carrying out maintenance tasks.
• Do not let the power cord hang over the edge of table or
countertop, or touch hot surfaces.
• Remove excess surface moisture from foods prior to
cooking to prevent heated oil from foaming out when food
is added.
• Do not leave the appliance unattended while in use.
Do not place any other liquids than oil or fat inside the
•
device.
A fire may occur if the appliance is covered or touches
•
flammable material, including curtains, draperies, walls,
and the like, when in operation. Do not place any item on
top of the appliance when in operation.
• Never pull on the power cord to disconnect the appliance
from the wall outlet; instead, pull on the plug.
Ensure the oil is within the maximum and minimum marks
•
in the oil inner pot when in use.
14 CLEANFRY INFINITY