Folding The Carrycot; The Pushchair Seat - Mutsy ICON Manual De Instrucciones

· Press the buttons on the side of the canopy and keep them pressed
down. The cover can now be folded down.
Fitting the rain cover to the carry cot (n)
· Make sure that the pram canopy is attached. Position the rain cover
from top to bottom over the carry cot and make sure that the rain cover
fits around the bottom of the carry cot.

Folding the carrycot

· The carry cot can be folded so that it can be transported compactly.
· Remove the mattress and the inner upholstery from the carry cot.
· Unlock the 3 metal brackets by pulling on the loops.
· The carry cot can now be folded.
Unfolding the carrycot (m)
· Put on the carry cot canopy and pull the top window upwards.
· Push the metal brackets into place. There is now tension again on the
upholstery.
· Put back the inner upholstery using the Velcro.
· Put back the mattress.
The seat (6 months – 15 kg / 33 lbs)
· The pushchair seat is suitable for children aged from 6 months and up
to 15 kg.
· When the pushchair is in the direction of travel, it can be folded in and
out at the same time as the frame and does not have to be removed
from the frame.
· The back rest and foot rest are adjustable.
· For all the steps below, ensure that the chassis is fully unfolded and the
brake is locked.
Moving the seat unit to face forwards (o)
· Position the attachment parts of the seat in the attachment points of
the chassis and press the seat down until a click is heard on both sides.
Caution! Place both notches of an attachment part simultaneously in
the chassis attachment point.
· Check if the seat is securely fixed by trying to lift it off the chassis.
Moving the seat unit to face backwards (p)
· Position the seat facing backwards and then place the seat attachment
parts in the chassis attachment points and press the seat down until
a click can be heard on both sides. Caution! Place both notches of an
EN
21