Content Of The Box; Corresponding To The Summery Diagram P; Orientation P; The Chassis P - Mutsy igo Manual De Instrucciones

English
The wheels
· To let the wheels run more smoothly
the wheel axles must regularly be
cleaned and lubricated with acid-free
vaseline. The wheels can never be lu-
bricated with oil.
The fabrics
· Removable fabric parts can be washed
in the washing machine on a wool cycle
at 30°C. Wash without bleaching agent
and do not put in the tumble dryer. Do
not iron or dry clean. Before washing
fasten all zips, velcro and poppers.
· To find out how to take the seat covers
on and off the pushchair, please go the
FAQs in the 'Service' section of our
website.
· All Mutsy fabrics have been tested for
water resistance but if the pram gets
really wet, water can penetrate the in-
ner and outer fabrics and leave marks.
To prevent this we recommend that you
always use the rain covers in case of
wet weather.
· You can treat stains on the outer fabric
or lining of non-removable parts using
a liquid, bleach-free soap. Always treat
the whole area.
· Always let a wet pram dry with the hood
fully unfolded.
· Even though Mutsy fabrics are selected
with the utmost care and tested for
colour fastness, fabrics can discolour.
Mutsy cannot be held liable for any dis-
colouration.

content of the box

· 1 chassis with basket
· 2 front wheels
· 2 rear wheels
summary of parts: corresponding to the
summary diagram
1. push bar
14
2. push bar adjustment
3. built-in safeguard
4. chassis unlocking buttons
5. attachment point
6. unlocking button for seat, carry cot
and adapters
7. folding safeguard
8. brake pedal
9. rear wheel
10. front wheel
11. swivelling wheel locking
12. wheel unlocking button
13. foot rest
14. leg support
15. leg support adjustment
16. bumper bar
17. 5-point safety harness
18. hood
19. carry handle
Orientation
· References in the text to the front, rear,
left or right side of the pram are de-
scribed from the perspective of a user
walking behind the pram.
The chassis
unfold the chassis (a, b)
· Press the folding safeguard inwards
(a1) and tilt the upper chassis until the
lower support clicks into place (a2) and
move the pushbar backwards until you
hear a second click (b).
· If you unfold the chassis, with the
pushchair seat fitted to the chassis,
you then have to manually raise the
front brace afterwards.
· Before use always check that the pram
has been unfolded and secured cor-
rectly.
Fold the chassis (c,d)
· Stand behind the chassis and put the
chassis on the brake. Push the height
adjustment button (c1) of the pushbar