Installation Instructions; Filling The Water Tank - Saeco VIA VENETO CAPP SS WHT SIN013AX Instrucciones De Uso

20
Repairs / Maintenance
In case of failure, problems or a suspected fault resulting from
the falling of the machine, immediately remove the plug from
the socket.
Never attempt to operate a faulty machine.
Servicing and repairs may only be carried out by authorised
specialists. Repairs must be carried out only by an authorised
service centre.
All liability for damages resulting from work not carried out by
professionals is declined.
Fire Safety Precautions
In case of fi re, use carbon dioxide (CO
water or dry powder extinguishers.
Key to Machine Components
Water tank
Water tank lid
Power button
Brew button with built-in "machine ready" light
Steam button
Hot water/steam knob
Brew unit
Steam wand
Power cord
Water recovery tray + grill
Accessories (possible variations according to the diff er-
ent models)
Crema fi lter holder
Filter for Crema fi lter holder
(single piece for 1 or 2 coff ees)
Coff ee measuring scoop
SAFETY REGULATIONS - STARTING THE MACHINE
4
For your own and other people safety, carefully follow
the "Safety Regulations" indicated in section 3.
4.1 Packaging
The original packaging has been designed and manufactured to
protect the machine during transport.
We recommend keeping the packaging material for possible
future transport.

4.2 Installation Instructions

) extinguishers. Do not use
2
Before installing the machine, read the following safety instruc-
tions carefully:
• Place the machine in a safe place.
• Make sure children cannot play with the machine.
• Do not place the machine on hot surfaces or near open
The coff ee machine is now ready to be connected to the electric
network.

4.3 Filling the Water Tank

• (Fig.17) - Remove the cover from the water tank (2).
• Remove the water tank (1) by pulling it up. Pay attention
• (Fig.18) - Rinse and fi ll it with fresh water taking care not
• (Fig.20) - Reinsert the tank into its seat and reposition the
ter intake valve. When the tank is removed, this valve
automatically closes to prevent water from spilling out.
Once inserting the tank, press gently.
• Replace the tank cover.
the tank.
Do not switch on the machine without water. Make sure
there is enough water in the tank.
INSTALLATION
fl ames.
not to damage the pipes inserted in the tank.
to overfi ll.
pipes previously removed.
Important Note:
On some models the tank is equipped with wa-
Fill the tank only with fresh, non-sparkling wa-
ter. Hot water or any other liquid may damage