Safety Information; General Safety Measures - Sinbo SHD 2651 Guia Del Uso

Formar el pelo
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
SINBO SHD-2651 HAIR STYLING SET USER MANUAL
Dear Customer,
Please read this manual carefully including with the safety instructions before
using the hairstyling set. Please keep this manual for future reference and
remember to give the manual to the new owner of the device when you are
giving it to someone.

SAFETY INFORMATION

SHD-2651 electrical device adopts industrial safety standards and complies
with local safety regulations. However, as a manufacturer we also provide our
customers with the following safety measures.

GENERAL SAFETY MEASURES

* Hairstyling set may only be connected to a socket with a voltage and frequency
rating identical to the rating plate of the device!
* Attention! Do not use this hairstyling set near bathroom, sink or other
containers which are filled with water! Even if the hairstyling set is disconnected
from the socket the risk continues.
* Always unplug the device after using and before cleaning the unit.
* Do not use the hot air concentrator brush in following cases:
* If the brush has visual damage,
* If the brush has been dropped.
* Hold the plug of the device when disconnecting from the socket, do not pull
the cable.
* A qualified electrician shall install a residual current circuit breaker with
rated switching current less than 30mA to the household power supply.
* Do not wind the power cable around the brush.
* Check the integrity of the main cable regularly for any damage.
* In order to avoid damaging your hair, observe the speed setting and do not
roll your hair around the round brush too tight and cover the air vents.
* The unit can only be repaired by a qualified electrician. Unauthorized repairs
can be dangerous. If your hairstyling set requires reparation, contact Customer
service department or the dealer you have bought the device from.
- 9 -
SHD 2651 INSTRUCTION MANUAL

Publicidad

Tabla de contenido
loading

Tabla de contenido