Sinbo SHD 2651 Guia Del Uso página 13

OPERATING INSTRUCTIONS
positions:
Forward position = Decreased heat output
Back position = Normal heat output
* Cool shot button (Figure 1/H): Helps to maintain the styling of your hair. It
is recommended to complete to style your hair with cool air.
MAINTENANCE PROGRAM (Figure 1/I)
Press the switch (Figure 1/I) down and slide it forward to select the
MAINTENANCE program for styling and drying your hair with a low heat soft
air contact. MAINTENANCE program can be used with both settings on air
output switch (Figure 1/I).
In order to turn off MAINTENANCE program slide the switch (Figure 1/I) to its
original position. When you turn of MAINTENANCE program your hairstyling
brush will operate will full-heat.
CHANGING THE ATTACHMENTS (Figure 2)
* Move the button on the side of the hairstyling set to the "@" mark. Remove
the mounted attachment.
* Mount the desired attachment by pressing it towards the appliance gently.
Turn the main unit to "@" mark. You will notice an audible click will when the
attachment is fixed.
Air concentrator nozzle (Figure 1/A)
Air concentrator nozzle adjusts the air output in order to dry the hair in small
tufts.
Curling iron (Figure 1/B)
Curling iron helps you to create natural waves on your hair.
Small curling brush (Figure 1/C)
Brush your hair tufts from roots to tips before curling. Upon winding your hair
in a curled fashion operate the hairstyling device (Setting 1 or 2) and apply
hot air until the curled hair becomes dry. Finally, press Cold shot button to
maintain the styling you have achieved.
SHD 2651 INSTRUCTION MANUAL - 12 -