Before Operation - Sinbo SHC 4370 Manual De Instrucciones

ATTENTION REMARKS
- To use it for the first time or when it has never been used for over half a year after
purchase. Please have it charged for 3 hours to activate the competence of batteries. If
it is charged when the secondary battery is completely discharged charging light may
not light on immediately, and will go to normal after several minutes.
- In order to better use hair clipper please drip oil onto blade. When the charge and use
the appliance the body will be heated is normal.
Attention: PLEASE DO NOT USE GASOLINE, ALCOHOL AND OTHER OIL.
- Keep away from water. Do not use near bathing pool, bathtub or other liquid container
with water.
- Charge the hair clipper at the temperature of 0˚C~35˚C. The parts of packing (plastic
bag, cardboard box, etc.).Must be kept out of reach of children. As they are possible
sources of danger.

BEFORE OPERATION

About length fixing accessories
1pcs cutting length comb. Hair length control, adjustable for cutting length from 3-15mm.
There are 2 piece combs, adjustable range for
A# is 0.5-9.5MM
B# is 10-20MM.
The minimum adjustable range is 0.5MM for each level.
1. To decide the length of cutting.
2. To select the suitable accessory for the length required. To keep it in alignment with
the blade.
3. Take off length fixing accessory. Push a side of the accessory by thumb to take it off.
Charging instructions
1. Place the switch to [O]. It is not allowed to charge when the switch is at [I].
2. Inset the coupler plug into the machine body.
3. Inset the power adaptor into the receptacle (the charging light will be
turned on).
HOW TO USE
To use it for the first time or when it has never been used for over half a year after
purchase, please have it charged for 3 hours to activate the competence of batteries. If
it is charged when the secondary battery is completely discharged, charging light may
not light on immediately, and will go to normal after several minutes.
When charging is finished:
1. Pull the power adaptor out of the receptacle.
2. Pull the coupler plug out of the machine body.
- Try to avoid continuous charging of long time (>20 hours)
- As it may shorten the service life of batteries.
- 6 -