ABB ACH580-34 Manual Del Usuario página 4

4 EN – Quick installation guide
•
Make sure that the module does not topple over when you move it on the floor: To open
the support legs, press each leg a little down and turn it aside (1, 2). Whenever
possible attach the module also with chains. Do not tilt the drive module. It is heavy and
its center of gravity is high. The module overturns from a sideways tilt of 5 degrees. Do
not leave the module unattended on a sloping floor.
1
EN
2
DA
DE
ES
•
FI To prevent the drive module from falling, attach its top lifting lugs with chains to the
cabinet (1) before you push the module into the cabinet and pull it from the cabinet.
Push the module into the cabinet and pull it from the cabinet carefully preferably with
FR
help from another person. Keep a constant pressure with one foot on the base of the
module (2) to prevent the module from falling on its back.
IT
NL
PL
PT
RU
SV
TR
ZH
3
1
2
1
2