Cleaning And Maintenance - Sinbo SHC 4367 Manual De Instrucciones

WARNING
1. If power cord or storage battery found to be damaged ,do not use it
2. If auxiliary comb or comb teeth near blade is damaged due to whatever reason, do not
use it
3. Please ensure hands and feet dry when using the product to avoid being hurt.
4. When connecting to power cord for charging, do not pull our power supply cord or the
appliance itself and ensure hair clipper's switch turned off
5. Children or disabled person must be supervised when using
6. Please ensure to disconnect power before cleaning or having maintenance on the
product.

CLEANING AND MAINTENANCE

1. Please ensure the hair clipper is turned off and power cord is disconnected before
cleaning.
2. Please remove auxiliary comb after using and use matched hair brush to lean off hair
left on the blade, please do not use other solvent
3. Also can remove blade in order to clean tool better, thus more effectively cleaning the
inner part.
4. For the main part of cleaning tool, use slightly wet and soft cloth. Do not use solvent
or product with abrasive material.
5. In order to ensure lasting performance, recommend to drip lubricants after using:
take lubricant, drip evenly onto blade in the arrow direction. start switch to ensure
lubricant penetrated into all cutting faces in seconds.
REPLACE BLADE
Note: The blade of hair clipper will be worn to some degree after used for a time.
Recommend to use new blade or replace auxiliary comb!
Before replacing the blade, please cut off power of hair clipper.
1. Press the mid part of blade to remove blade.
2. Inset B into plastic slot.
3. Press mid part of blade and snap A into slot till completely into plastic slot
4. Before use, please first use lubricant.
5. It is difficult to finish third step, please press on-off key to activate hair clipper, then
repeat the process above mentioned.
- 6 -