Sony NUA-BK30 Manual De Instrucciones página 28

brackets using the screws, your
hands may become caught if the
parts move and may cause an
injury.
4
Connect the cables from the
ceiling suspension arm to the IP
converter.
5
Connect the DC power cable to
the monitor.
6
Attach the cable cover of the
monitor.
Note
Connect the DC power cable
before attaching the cable cover
of the monitor. The DC power
cable cannot be connected once
the cable cover has been
attached.
7
Connect the DC IN cable of the AC
adaptor to the IP converter.
10
Mounting
GB
DC IN cable
(cannot be
removed)
AC-82MD
AC Adaptor
Power cable
(can be
removed)
Notes
• Do not connect the power cable
to the AC adaptor at this point.
• When bundling and routing
cables, do not place any
excessive load on the cables.
Attaching the Cable Cover
1
Remove the cable cover screw
(A), and remove the lid.
Tip
If the ceiling suspension arm is
large and cables will not protrude
from the lid area, you can attach
the cable cover without removing
the lid.