Sony NUA-BK30 Manual De Instrucciones página 32

When not using the AC
adaptor bracket
1
Attach the left side of the cable
cover as viewed from the rear of
the monitor using a supplied M4
screw (large).
Attaching the Monitor
Bracket and Arm Bracket
1
Remove the two M4 screws used
to secure the monitor bracket in
step 3 of
Bracket" (page 9)
monitor bracket.
Caution
Hold the monitor when removing
the screws, taking care not to
catch your hands in the bracket.
Note
Take care not to snag the cables
when closing the monitor
bracket.
14
Mounting
GB
"Attaching the Arm
, and close the
2
Attach the arm bracket and
monitor bracket using the four
M4 screws (large) removed in
"Attaching the IP
step 1 of
Converter to the Monitor Bracket"
(page 8)
.
Note
Take care not to snag the DC IN
cable of the AC adaptor when
attaching the brackets using the
M4 screws (large).
Attachment
screw locations
Right side
(viewed from rear)
Attachment
screw locations
Left side
(viewed from rear)