Schumacher Electric XM1-5 Manual Del Usuario página 10

Ocultar thumbs Ver también para XM1-5:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Ensure that all of the charger components are in place and in
good working condition, for example, the plastic boots on the
battery clips.
3. Connect the battery following the connection instructions
described in Using the Quick-Connect Cable Connectors section.
4. Connect the AC power, following the precautions listed in
Section 8.
5. If you've connected everything correctly, the AC POWER
LED will be lit, indicating the charger has power, the
CONNECTED
properly connected and the CHARGING
indicating that the charger is charging. If any of these LEDs are
not lit, check the connections at the battery and AC source or
have the battery checked/replaced.
NOTE: This charger is equipped with an auto-start feature. It will
not supply current to the battery clips until a battery is properly
connected and the CONNECTED
chargers, the clips will not spark if touched together.
Using The Quick-Connect Cable Connectors
Connect either of the two output cable assemblies to the charger.
Make sure to place the charger on a dry, non-flammable surface
like metal or concrete.
NOTE: Never connect the clamp and ring terminal connectors
together for use in other applications, such as external battery or
other power source charging, or to extend the output cable length,
as reverse polarity and/or overcharge conditions will occur.
Battery Clips
Connect the battery cable assembly to the charger. Follow the
safety instructions in sections 6 or 7 to connect the output clips to
the battery.
Ring Terminals
The ring connectors permanently attach the battery providing easy
access to quickly charge your battery. To permanently attach it to
a battery, loosen and remove each nut from the bolts at the battery
terminals. Connect the red positive ring connector ring to the
positive (POS, P, +) battery terminal. Connect the black negative
ring connector ring to the negative (NEG, N, -) battery terminal.
LED will be lit, indicating the battery is
10
LED will be lit,
LED is lit. Unlike traditional

Publicidad

Tabla de contenido
loading

Tabla de contenido