Control Panel - Schumacher Electric XM1-5 Manual Del Usuario

9. FEATURES
10. ASSEMBLY INSTRUCTIONS
Remove all cord wraps and uncoil the cables prior to using the
battery charger.

11. CONTROL PANEL

LED Indicators
AC POWER
supplied to the battery charger.
CONNECTED
is properly connected to the battery.
CHARGING
detected a battery and is charging it.
CHARGING
is in Abort Mode.
CHARGED
charged and the charger is in maintain mode.
NOTE: See the Operating Instructions section for a complete
description of the charger modes.
12. OPERATING INSTRUCTIONS
accordance with the assembly instructions before it is used.
Charging
1. Make sure to place the charger on a dry, non-flammable
surface, like metal or concrete.
1
(red) LED lit: Indicates that there is AC power
(red) LED lit: Indicates that the charger
(yellow) LED lit: Indicates the charger has
(yellow) LED flashing: Indicates the charger
(green) LED lit: Indicates the battery is fully
This battery charger must be properly assembled in
•
1. AC POWER
2
3
2. CONNECTED
3. CHARGING
4
4. CHARGED
5. Battery Cable Assembly
6. Output Cord Assembly
5
with Ring Terminal
6
9
•
(red) LED
(red) LED
(yellow) LED
(green) LED