Technical Data; Protecting The Environment - Stanley FATMAX SFMCS600 Traducido De Las Instrucciones Originales

ENGLISH
● When cutting thin sheet metal, clamp a piece of scrap
wood to the back surface of the workpiece and cut through
this sandwich.
● Spread a film of oil along the intended line of cut.
Accessories
The performance of your tool depends on the accessory used.
STANLEY FATMAX accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
This tool is suitable both for U-shank and T-shank saw blades.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
@
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance,
switch off and unplug the tool.
● Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
● Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
● Occasionally apply a drop of oil to the axle of the blade
support roller.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
● Safely dispose of the old plug.
● Connect the brown lead to the live terminal in the
new plug.
@
● Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth
terminal. Follow the fitting instructions supplied with
good quality plugs. Recommended fuse: 5 A.

Protecting the environment

Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
10
(Original instructions)

Technical data

Voltage
V
dc
No-load speed -1
min
Stroke length mm
Max depth of cut
Wood mm
Steel mm
Aluminium mm
Weight kg
Charger SFMCB11
Input Voltage
V
AC
Output Voltage
V
DC
Current A
Battery SFMCB201
Voltage 18
V
DC
Capacity Ah 1.5
Type Li-Ion
Level of sound pressure according to EN62841:
Sound pressure (L ) 82 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L ) 93 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN62841:
2
Cutting boards (a ) 4.9 m/s , uncertainty (K) 1.5 m/s
h, B
Cutting sheet metal (a ) 8.8 m/s
h, M
SFMCS600 (H1)
SFMCB12 SFMCB14
230 230
18 18
1.25 2
SFMCB202 SFMCB204 SFMCB206
18 18
2.0 4.0
Li-Ion Li-Ion
2
2 2
, uncertainty (K) 1.5 m/s
18
0 - 2500
19
55
8
20
2.62
230
18
4
18
6.0
Li-Ion