Technical Data; Definitions: Safety Guidelines; English (Original Instructions) - Stanley SST1800 Traducción De Las Instrucciones Originales

TABLE SAW
SST1800
Congratulations!
You have chosen a STANLEY tool. Years of experience, thorough
product development and innovation make STANLEY one of the
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Frequency
Power input
No load speed
Blade diameter
Bore Size
Blade kerf
Blade body thickness
Riving knife thickness
Table size
Max. cutting depth at 45º
Max. cutting depth at 90º
Blade bevel range
Weight
Noise values and/or vibration values (triax vector sum) according to EN62841‑3‑1:
L (emission sound pressure level) dB(A)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
SST1800
V 230
AC
2
Hz 50
W 1800
min 4800
‑1
mm 254
mm 30
mm 2.8
mm 1.8
mm 2.5
mm 560x680
mm 50
mm 80
º 0–45º
kg 28.8
87.5
dB(A)
103.5
dB(A)
3
EC‑Declaration of Conformity
Machinery Directive
Table Saw
SST1800
STANLEY declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841‑1:2015+AC:2015, EN62841‑3‑
1:2014+AC:2015 + A11:2017.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact STANLEY at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of STANLEY.
Becky Cotsworth
Director – Outdoor Products Group
STANLEY Europe, Egide Walschaertsstraat14‑18,
2800 Mechelen, Belgium
03.08.2021
a
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
ENGLISh
29