Repair; Maintenance And Care; Change The Air Filter (03); Changing The Oil (06) - AL-KO Pro 225 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
GB

6 REPAIR

WARNING!
Risk of injury during repair work
Improper repairs can lead to serious in-
juries and damage to the appliance.
Repair work may only be carried out
by AL-KO service centres or autho-
rised specialist workshops.
Only original spare parts from AL-KO are al-
lowed.

7 MAINTENANCE AND CARE

WARNING!
Risk of injury
Inadvertent switching on of the engine
can lead to serious injuries.
Before setting, maintenance and re-
pair work, always switch off the en-
gine and secure against being
switched on again.
Regular maintenance is essential for safety
and maintaining performance.
Observe the maintenance schedule.
For use under more demanding conditions,
more frequent maintenance is required.
1. Before all maintenance and cleaning work:
Remove (04/a) spark plug connector (04/1)
from the spark plug (04/2).
2. Perform the maintenance and cleaning work
described in this section according to the
maintenance schedule.
3. After maintenance and cleaning work: Reat-
tach (05/a) the spark plug connector(05/1) to
the spark plug (05/2).
7.1

Change the air filter (03)

NOTE
The filter element must be kept free
of grass residue and dirt.
Only replace filter elements with
original spare parts.
The engine must never be operated
without a properly installed filter ele-
ment.
Clean the air filter regularly. Renew air filters if
damaged.
1. Clean the area around the filter cover (03/1).
24
2. Unscrew knob (03/2) of the filter cover and
remove the filter cover (03/a).
3. Pull out (03/b) the filter element (03/3).
4. Check the condition of the filter element. The
filter element must be in perfect condition,
clean and fully functional. Otherwise the filter
element must be serviced or replaced.
5. Insert the filter element and refit the filter cov-
er.
7.2

Changing the oil (06)

Check the oil level regularly. Check the oil level
every 5 operating hours or every day before start-
ing the engine.
WARNING!
Danger of explosion and fire
Escaping fuel will create an explosive
petrol/air mixture. Deflagration, explo-
sion and fire can lead to serious and
even fatal injuries if fuel is not handled
properly.
Empty the fuel tank before draining
the oil.
NOTE
Contact our customer service if you can-
not carry out work yourself.
NOTE
The oil capacity for the AL-KO Pro 225
engine is max. 0.5 l.
NOTE
Drain off the old oil when the engine
is warm. Warm oil runs out quickly
and fully.
Dispose of used oil in an eco-friend-
ly manner!
1. To empty the fuel tank: Allow the engine to
run until it stops itself.
Or drain the fuel.
2. Remove the spark plug connector (04/1).
3. Place the container (06/1) for the old oil.
4. Unscrew the oil dipstick (06/2) and wipe it
clean.
5. Unscrew and remove the drain plug (06/3).
6. Allow the oil to run out completely into a con-
tainer.
Repair
AL-KO Pro 225

Publicidad

Tabla de contenido
loading

Tabla de contenido