Metra 99-7630 Instrucciones De Instalación página 4

To the 99-7630 radio trim panel
5. Attach the (6) panel clips provided.
(Figure A)
6. Secure the climate controls to
the panel using the (4) #4 x 1/2"
Phillips screws provided.
(Figure B)
7. Snap the passenger airbag light
through the front of the panel.
(Figure B)
Kit Preparation
(Figure A)
(Figure B)
99-7630
8. Using the (4) #4 x 1/2" screws
provided, secure the radio/climate-
control side trim panels. (Figure C)
9. Secure the radio brackets to the
panel using the (4) #8 x 3/8"
Phillips screws provided.
(Figure C)
10. Using the factory hardware, secure
the climate-control module to the
lower portion of bracket/panel
assembly. (Figure D)
Continue to kit assembly.
4
(Figure C)
(Figure D)