Kit Assembly - Metra 99-7630 Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Attach the pocket to the bracket/
panel assembly using the
(4) #8 x 3/8" Phillips screws
provided. (Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio into the completed
assembly, and then secure it using
the screws supplied with the radio.
(Figure B)
4. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio, climate
control module, and climate
controls. Metra recommends using
the proper mating adapter from
Metra and/or AXXESS. Test the
radio for proper operation.
5. Reassemble the dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
99-7630
(Figure B)
5