Kit Preparation - Metra 99-7630 Instrucciones De Instalación

From the factory radio/climate-
control panel:
1. Remove the (4) Phillips screws
securing the climate-controls and
then remove. (Figure A)
2. Unclip and remove the passenger
airbag light. (Figure A)
3. Unscrew (4) Phillips screws and
remove the radio/climate-control
side trim panels from the radio
panel (save for kit assembly).
(Figure B)
4. Remove the (2) Torx screws
securing the climate-control
module below the radio and
then remove. (Figure C)
Continued on the next page.

Kit Preparation

(Figure A)
99-7630
(Figure B)
3
(Figure C)