Metra 99-7630 Instrucciones De Instalación página 6

ISO DDIN radio provision
1. Slide the radio into the completed
assembly, and then secure it using
the screws supplied with the radio.
(Figure A)
2. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio, climate
control module, and climate
controls. Metra recommends using
the proper mating adapter from
Metra and/or AXXESS. Test the
radio for proper operation.
3. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
99-7630
6