1. Pull down on the shift collar,
remove the clip holding the shift
knob, and then remove the knob.
(Figure A)
2. Open the center console
compartment. Using a panel
removal tool, pry up on the rear of
the center console trim panel, and
then unplug and remove the panel.
(Figure B)
Dash Disassembly
(Figure A)
(Figure B)
99-7630
3. Unclip and remove the vent/
hazard-switch trim panel above
the radio. (Figure C)
4. Remove (4) Phillips screws
securing the radio/climate-control
panel, then unplug and remove
the panel. (Figure D)
Continue to kit preparation.
2
(Figure C)
(Figure D)