Bluetooth Operation - Burda TERM2000 Instrucciones De Montaje Y Uso

B
LUETOOTH OPERATION
A free Bluetooth App is available to download for this
heater for either your iPhone, iPad or Android device.
The BURDA PERFECTCLIME APP will allow you to connect
remotely to up to 8 heaters and control them
independently. Control functions include:
On/Off

Variable heat output from 25% to 100%

Timer with auto shut off

Password connection to heaters

Individual heater identification/renaming and control

To download, search for 'BURDA PERFECTCLIME' in your
App store or Google play store and add the heaters to your
device.
R
ESET OPERATION
Press the Reset button shortly, the power will be

adjusted accordingly(Low,Middle ,High,ON/OFF)
R C I
EMOTE ONTROL NSTRUCTION
Button
Up Arrow
Max
Down Arrow
On
Off
Notice：
Use 2 pieces AAA size 1.5V batteries in the remote control.Remove the battery when not in use for long

time,thus the lifespan of remote control can be extended.
Choose the same specification battery when replacing the battery inside, otherwise it may cause remote

control not work ,thereby affect the normal use of the Heater.
The Heater can be still used in normal except remote control function if the remote control is missing or

lost .Please contact service agent for further help if you need the function.
The remote control function may be out of work if there is a barrier between the remote control and

heater .
Replacing the batteries duly so as not to affect the normal use of Heater and remote control.

Graphic Feature
Up one heating level
The Heater goes directly to the highest
heating level.
Down one heating level
To switch the Heater on:
Press ON. The patio Heater has a soft start
function of 33% power. 4 seconds after the
Heater has been turned on, it will
automatically switch to the last heating level
used. In case of the first-time use, after 4
seconds the heater will automatically switch
to 100% power.
To switch the heater off:
Press OFF. The heater will switch to standby
mode(the receiver indicator will light up).
Press the Rest button for at least 4 seconds ,the heater

will restore factory settings