Vibration; Maintenance; Protecting The Environment - SKF A Serie Instrucciones De Uso

Vibration

The declared vibration emission values stat-
ed in the technical data and the declaration
of conformity have been measured in
accordance with a standard test method
provided by EN 60745 and may be used for
comparing one tool with another.
The declared vibration emission value may
also be used in a preliminary assessment of
exposure.
!
Notice
Vibration emission value dur-
ing actual use of power tool can differ
from declared value depending on
ways tool is used. Vibration level may
increase above level stated.
When assessing vibration exposure to deter-
mine safety measures required by 2002/44/
EC to protect persons regularly using power
tools in employment, an estimation of vibra-
tion exposure should consider, the actual
conditions of use and the way the tool is
used, including taking account of all parts of
the operating cycle such as the times when
the tool is switched off and when it is running
idle in addition to the trigger time.
W A R N I N G
Do not operate this grease gun
without reading instruction
manual.
Failure to comply may result
in serious injury and/or death.

Maintenance

Designed to operate over a long period of
time, with a minimum of maintenance.
Continuous satisfactory operation depends
upon proper tool care and regular
cleaning.
Your charger does not require any
maintenance other than regular cleaning.
W A R N I N G
Do not perform maintenance on this
grease gun with the battery installed.
• Do not clean the charger while
plugged into an electrical outlet
• Failure to comply may result in serious
injury and/or death.
!
Notice
Regularly clean ventilation slots in
tool and charger using a soft brush or
dry cloth.
Regularly clean motor housing
using a damp cloth. Do not use any
abrasive or solvent-based cleaner.
5
Protecting the
environment
Should you find one day that your SKF
product needs replacement, or if it is of no
further use to you, do not dispose of it with
household waste. Make this product avail-
able for separate collection.
Separate collection. This prod-
uct must not be disposed of
with normal household waste.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by
the retailer when you purchase a new
product.
Separate collection of used
products and packaging allows
materials to be recycled and
used again.
Re-use of recycled materials
helps prevent environmental
pollution and reduces the
demand for raw materials.
Run the battery down com-
pletely, then remove it from the
tool.
NiCd, NiMH and Li-Ion bat-
teries are recyclable. Take them
to any authorized repair agent
or local recycling.