Tool Use And Care; Specifications; Model - SKF A Serie Instrucciones De Uso

Tool use and care

Do not continue to hold down trigger if
grease gun is stalled. This could damage the
motor or cause fire.
Disconnect battery pack from tool before
making any adjustments, changing acces-
sories, or storing the tool. Such preventive
safety measures reduce the risk of starting
the tool accidentally.
Store the tools out of reach of children
and other untrained persons. Tools are dan-
gerous in the hands of untrained users.
If damaged, have the tool serviced before
using. Many accidents are caused by poorly
maintained tools.
Use only accessories that are recom-
mended by SKF.
Only accessories that are capable of han-
dling 700 bar should be used.
(10 000 psi)
Accessories that may be suitable for one tool
may create a risk of injury when used on an-
other tool.

Specifications

SKF battery driven grease guns TLGB 20
Operating power
Maximum operating pressure:
Low output
High output
Grease reservoir capacity
Maximum peak pressure
Operating temperature range
Operating current
Rated current
Lubricant (grease)
Grease output:
Low output (L)
High output (H)
Weight
Accessories:
Battery li-ion
Output
Capacity
Battery charger
Charge time
Input, V AC (0,4 A)
Battery charger
Charge time
Input, V AC (0,6 A)
Outlet hose
Pressure rating
Length of the hose
Sound pressure
Acoustic power
Vibration emission value (ah)
Note 1: Operating current and grease output data at 70 bar
Note 2: The declared vibration total value has been measured in accordance with a standard test method and may be used for com-
paring one tool with another and the declared vibration total value may also be used in a preliminary assessment of exposure.
Note 3: The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in
which the tool is used; and of the need to identify safety measures to protect the operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
Note 4: Flow meter accuracy compromised below freezing.

Model

Sales model Components included
TLGB 20 Grease gun with battery, charger 230 V AC and carrying case
TLGB 20/110V Grease gun with battery, charger 110V AC and carrying case
TLGB 20-5 Charger 230 V AC
TLGB 20-6 Charger 110 V AC
TLGB 20-2 Battery pack
8
14,5 to 20 V DC
400 bar (6 000 psi)
400 bar (6 000 psi)
411 g (14.5 oz)
700 bar (10 000 psi)
-20 to 50 °C (0 to 120 °F)
4 A at -6 to 54 °C (20 to 130 °F)
5 A at -6 to 54 °C (20 to 130 °F)
up to NLGI #2
100 ml/min. (3.5 oz/min.)
160 ml/min. (5.5 oz/min.)
3,0 kg (6.5 lb)
TLGB 20-2
20 V DC maximum
1 500 mAh
TLGB 20-5
1,5 hours
220-240 V, 50/60 hz
TLGB 20-6
1,5 hours
120 V, 60 hz
TLGB 20-3
700 bar (10 000 psi)
900 mm (36 in.)
LpA 69,5 dB(A), uncertainty (K), 3 dB(A),
LwA 80,5 dB(A), uncertainty (K), 3 db(A),
0,6 m/s 2 , uncertainty (K) 1,5 m/s
(1 000 psi).
2