Intended Use; Safety Advice - BGS technic 8725 Guia Del Usuario

Engine Timing Tool Set for Fiat 1.2 16V
TOOLS
1 Piston Height Adaptor (2), to be used as OEM 1860992000
2 Camshaft Adjusting Tools (2), to be used as OEM 1860985000
3 Tension Adjustment Wrench, to be used as OEM 1860987000

INTENDED USE

This tool is used to check and adjust the engine timing. The set is suitable for following models:
Manufacturer
Fiat
Lancia
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY ADVICE

DO NOT use the set if any parts are missing or damaged.
Never lay tools on the vehicle's battery. This may short the terminals together.
Be careful when working on running engines. Loose clothes, tools and other things can be
caught up in revolving parts which may lead to serious injuries.
Keep children and other unauthorised persons away from the working area.
Be careful when working on hot engines – risk of burn!
Remove the ignition key before repair so that the engine will not start unintentionally.
This manual is just brief information and will not replace a garage handbook.
Always consult specific service literature for information about torques, assemblies and
disassemblies etc.
After any successful maintenance and before starting the engine, you should rotate the engine
for two turns manually to check the new control time.
Turn the engine in the normal direction (clockwise unless stated otherwise).
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
2
Model
Fiat 500 1.2
Brava 1.2
Bravo 1.2 16V
Grande Punto 1.2
Idea 1.2
Idea 1.2 / 16V
Marea 1.2
Marea Weekend / Marengo 1.2
Palio Weekend 1.2 / 16V
Punto 1.2
Punto / Punto Classic 1.2 / 16V
Stilo 1.2
Ypsilon 1.2 / 16V
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
3
2
1
1
Engine Code
169A4.000
182B2.000 - 188A5.000
182B2.000 - 188A5.000
199A4.000
188A5.000
188A5.000
182B2.000
182B2.000
188A5.000
176B9.000
188A5.000
188A5.000
176B9.000 - 188A5.000
BGS 8725
Year
2007
1995-02
1993-99
1993-99
1999
1996-03
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed