Device Description; Specified Conditions Of Use; Requirements For The User; Technical Data - KRESS 360 BPS BiPower Manual De Instrucciones

39694_BA_360BPS.book Seite 19 Mittwoch, 18. April 2012 9:45 09

Device description

3. Device description
Read all the warnings and instructions
before using the equipment.
Failure to comply with the warnings
and safety instructions may result in
electric shock, fire and/or serious
injury.
For a clearer understanding, please consult the
enclosed illustrations showing the device. Open
these illustrations while reading the operating in-
structions.
Operating elements
I Unlocking sleeve
II Operating mode switch
III Charge level indicator button
IV On/Off control switch
V Left/Right rotation switch
VI Interlock button mains cable module
VII Interlock button, battery pack
Device components
1 Tool holder
2 Dust protection cap
3 Additional handle
4 Vibration-damping element
5 Mains cable module
6 SDS-plus quick-change chuck
7 Quick-action chuck (Accessories)
8 Carrier spindle
9 Integrated charger
10 Battery charge level indicator
Contents
See packaging
This tool is equipped with Bi-Power technology.
This means you can choose between operation
with a battery pack or via the mains (battery pack
must always be inserted).
The battery is automatically charged during mains
operation.

Specified Conditions of Use

The pneumatic hammer drill is designed for uni-
versal use for hammer drilling and chiselling in
concrete, brick and stone.
It is also suitable for drilling without impact in
wood, metal, ceramic and plastic.

Requirements for the user

The tool must only be operated, maintained and
serviced by authorised trained personnel. The
personnel must be made aware of the relevant
dangers.

Technical data

Mains voltage in V / Frequency in Hz
Nominal power rating P in Watts
Noise levels
L = A-rated sound pressure level
pA
L = A-rated sound power level
wA
K = Measurement uncertainty value
The noise level can exceed 85 dB(A)
during operation.
Wear hearing protection!
Triaxial vibration emission value,
measured in accordance with
EN 60745.
K = Measurement uncertainty value
Battery
Rated voltage of battery in V DC
Capacity in Ah
Battery with lithium-ion technology
The vibration emission level given in
this information sheet has been
measured in accordance with a
standardised test given in EN 60745
and may be used to compare one
tool with another.
The vibration emission level will vary because of
the ways in which a power tool can be used and
may increase above the level given in this infor-
mation sheet. This could lead to underestimation
of vibration when the tool is used regularly in such
a manner.
English 19
EN
360BPS-EN / 1205