Intended Use; Product Features; Technical Data; Noise/Vibration Information - Berner BACS-1 Manual Original

OBJ_BUCH-175-005.book Page 13 Friday, August 21, 2015 7:48 AM

Intended Use

The machine is intended for driving in and loosen-
ing screws as well as for drilling in wood, metal, ce-
ramic and plastic.
The light of this power tool is intended to illuminate
the power tool's direct area of working operation
and is not suitable for household room illumination.

Product Features

The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Screwdriver bit*
2 Tool holder
3 Locking sleeve
4 Torque presetting ring
5 Gear selector
6 Battery unlocking button
7 Battery pack*
8 Rotational direction switch
9 On/Off switch
10 "PowerLight"
11 Handle (insulated gripping surface)
12 Drill bit with hexagon shank*
* The accessories illustrated or described are not in-
cluded as standard delivery.

Technical Data

Cordless Screwdriver
Art. No.
Rated voltage
No-load speed
– 1st gear min
– 2nd gear min
Max. torque for hard/
soft screwdriving
application according
to ISO 5393
Max. drilling dia.
– Steel
– Wood
Max. screw dia.
Weight according to
EPTA-Procedure
01:2014
Permitted ambient
temperature
– during charging
**
– during operation
and during storage
* depending on the battery pack being used
** Limited performance at temperatures <0
1 609 92A 1E1 • 21.8.15
Cordless Screwdriver
Recommended
batteries
Recommended
chargers
* depending on the battery pack being used
** Limited performance at temperatures <0

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-2.
Typically the A-weighted sound pressure level of
the product is 71 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values a
certainty K determined according to EN 60745-2-2:
Drilling into metal: a
Screwdriving without impact: a
K =1.5 m/s
The vibration level given in this information sheet
has been measured in accordance with a standard-
ised test given in EN 60745 and may be used to
compare one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or insertion tools or is poorly main-
tained, the vibration emission may differ. This may
BACS-1 10,8V LI
significantly increase the exposure level over the
243727
total working period.
V= 10.8
An estimation of the level of exposure to vibration
should also take into account the times when the
-1
0 – 400
tool is switched off or when it is running but not ac-
-1
0 – 1300
tually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
Nm 30/15*
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
mm 10
mm 19

Declaration of Conformity

mm 7
We declare under our sole responsibility that the
product described under "Technical Data" is in
kg 0.80
conformity with all relevant provisions of the direc-
tives 2009/125/EC (Regulation 1194/2012),
2011/65/EU, until 19 April 2016: 2004/108/EC,
from 20 April 2016 on: 2014/30/EU, 2006/42/EC
°C 0...+45
including their amendments and complies with the
following standards: EN 60745-1, EN 60745-2-2.
°C -20...+50
°C
BACS-1 10,8V LI
BACC 10,8 V S
(triax vector sum) and un-
h
2
<2.5 m/s , K =1.5 m/s
h
<2.5 m/s
h
2
English | 13
BACP 18V
S-B x.x Ah
°C
2
2
,