SPECIAL SAFETY NOTICES
• Only use impact-resistant screw inserts that are in perfect working order and specially designed for this
purpose.
•
Always attach and secure screw inserts to the device as per the instructions.
• Do not touch rotating screw inserts when the device is running.
•
Getting caught up carries a risk of severe injuries.
•
Keep jewellery such as necklaces or bracelets, and long hair or loose gloves away from the device.
• Do not use the device in rooms with a potentially explosive atmosphere.
• Do not aim the device at other persons.
• Do not run the device in idle with the nut attached.
• Replace tool inserts during maintenance or when not in use; disconnect the air supply to prevent personal
injuries or material damages.
• Air tools must not come into contact with sources of electricity.
•
The device is not insulated against contact with sources of electricity.
• Please note the max. operating pressure of 6.3 bar.
•
Make sure that this is not exceeded.
• Check that the hose connection is secure.
• Only disconnect the hose from the machine when it is not under pressure.
•
Loose air hoses flapping around can cause severe personal injuries or material damages.
• Watch out for the reaction torque when starting the device. In confined spaces, this could cause hand
injuries.
• The user must be physically and mentally capable of operating the device and ensuring it is in safe
condition.
• Dust and vapours can be produced during operation of the device.
•
These can cause harm to health, such as cancer, birth defects, asthma and/or dermatitis.
•
To prevent this, a risk assessment should be carried out and control measures put in place.
• High noise pollution during operation.
•
If no hearing protection is worn, this can lead to serious physical harm, such as tinnitus.
• Vibrations during operation.
•
Vibrations occur during operation, which can damage or disturb nerves or blood circulation in the
hands and arms.
• Do not transport the device with the air hose connected.
•
Disconnecting the air hose can lead to severe personal injuries or material damages.
Conditions for use
The device must be used exclusively for undoing and tightening screws, bolts or nuts. All other use is
expressly prohibited!
We cannot accept any liability for injuries or damages resulting from inexpert or improper use, use for other
purposes or use not compliant with the safety instructions!
In cases of improper use, the user shall be liable for damages!
EN