Protecting The Environment - Black+Decker BDAG710 Traducido De Las Instrucciones Originales

English @
(original instructions)
Warning! No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Troubleshooting
Problem Possible cause
Unit will Cord not
not start. plugged in.
Cord or switch
is damaged.
Grinding and cutting accessory chart
Grinding Wheels
Type 27 guard
Unthreaded backing flange
Type 27 depressed center
wheel
Threaded clamp nut
Sanding Flap Discs
Type 27 guard
Hubbed sanding flap disc
Type 41 Cutting Wheels
12
Possible solution
Plug tool into a
working outlet.
Have cord or switch
replaced at a
BLACK+DECKER
service center or
authorizedservicer.
Type 27 guard
Type 27 hubbed wheel
Type 27 guard
Unthreaded backing flange
non-hubbed sanding flap
disc
Threaded clamp nut
Type 41 guard
Backing flange
Abrasive cutting wheel
Clamp nut
Wire Wheels
Type 27 guard
3 inch wire cup brush
Sanding Discs
Rubber backing pad
Sanding disc
Threaded clamp nut

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Type 41 guard
Backing flange
Diamond cutting wheel
Clamp nut
Type 27 guard
4 inch wire cup brush