Storage And Maintenance - TEFAL EASYDRY FS4020K0 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
i
Leave it at a local civic waste collection point.
Use
Adjust the temperature
• Select the temperature (see table below) setting the thermostat facing the indicator.
L
inen
c
otton
W
ooL
s
iLk
s
ynthetic
(Polyester, Acetate,
Acrylic, Nylon)
• The thermostat light comes on. It will go out when the soleplate is hot enough.
• Your iron heats up quickly : so begin by ironing fabrics that are ironed at low temperatures first, then go on to
those requiring a higher temperature.
• When ironing fabrics with mixed fibres, set the ironing temperature for the most delicate fibre. For delicate
fabrics we recommend testing the fabric first on an inconspicious place eg (inside the hem).
It is normal for the indicator light to switch on and off during ironing.
If you turn down the thermostat, wait until the thermostat light comes back on before beginning to iron
again.

Storage and Maintenance

Store your iron
• Unplug the iron.
• Wait until the soleplate cools down and Wind the cord around the heel of the iron.
• Store the cold iron on its heel.
Always set your iron on its heel, in order to avoid domage or scratching to the soleplate. Caution: placing
your iron flat onto a metallic surface might domage or scratch the soleplate.
Cleaning the soleplate
• Unplug the iron, and when the soleplate is just warm, wipe it with a soft cloth.
Never use abrasive or aggressive products.
Problems with your iron?
PROBLEM
The soleplate is dirty or brown and may
soil clothes.
The soleplate is scratched or damaged.
F
abric
POSSIBLE CAUSES
The temperature is too high.
You have positioned your iron flat on
the metallic iron support.
You have cleaned your soleplate with
an abrasive cloth or steel wool.
P
osition oF
thermostat cursor
maX
•••
••
Clean the soleplate as indicated in the
user guide Use a lower temperature.
Always place your iron in the support
base Clean the soleplate as indicated
in the user guide.
6
SOLUTIONS
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido