General Power Tools Safety Warnings; Work Area Safety; Electrical Safety - Rapid E-Tac Manual Del Usuario

Instructions
Triebsanleitung
Notice
Gebruiksaanwijziging
Istruzioni
Instrucciones
Instruções
Instruktioner
Brugervejledning
Brukerveiledning
Ohjeet
Instrukcja
Инструкции
Juhend
Instrukcijos
Lietošanas pamācība
Pokyny
Návod
Navodila
Upute za uporabu
Οδηγίες
Talimatlar
Инструкции
Használati utasítások
Instrucţiunilor
4
ELECTRIC TACKER
Original Instructions
5
1 1
19
26
33
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded)
39
power tool or battery-operated (cordless) power tool.
46

1) WORK AREA SAFETY

53
a) Keep your work area clean and well lit. Cluttered benches and dark areas
59
65 b) Do not operate power tools in explosive atmospheres, such as in the
71
77
c) Keep bystanders, children, and visitors away while operating a power
84

2) ELECTRICAL SAFETY

91
a) Power tool plugs must match the outlet. Never modify the plug in any
97
103
b) Avoid body contact with grounded surfaces such as pipes, radiators,
1 10
1 16
c) Do not expose power tools to rain or wet conditions. Water entering a
123
129
d) Do not abuse the cord. Never use the cord for carrying, pulling or
135
142
148
e) When operating a power tool outdoors, use an extension cord suitable
156
162
f) If operating a power tool in a damp location is unavoidable, use a

GENERAL POWER TOOLS SAFETY WARNINGS

WARNING!! Read all safety warnings and all instructions. Failure to
follow all instructions listed below may result in electric shock, fire and/or
serious personal injury.
invite accidents.
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
tool. Distractions can cause you to lose control.
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
ranges and refrigerators. There is an increased risk of electric shock if your
body is grounded.
power tool will increase the risk of electric shock.
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of electric
shock.
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
5