Publicidad
Idiomas disponibles
Idiomas disponibles
The grip heater temperature can be adjusted in three steps by pushing
the switch. Pushing the switch changes temperature as follows:
OFF
Do not use the grip heater, when air temperature is above 20 degrees
to avoid burns due to overheating.
• Be sure to wear gloves to avoid burns.
• Replace the damaged grips to avoid burns or electrical shock.
NOTE:
•
The grip heater has a built-in automatic switch to avoid unnecessary
battery power consumption. The automatic switch turns off grip
heater when the engine speed becomes lower at engine idling speed.
When the engine speed increases and the battery voltage increases,
the automatic switch turns on grip heater and the indicator comes
back.
•
Pushing the switch will not turn on the grip heater when the engine
speed is low. Increase the engine speed and push the switch again to
turn on the grip heater.
MAX
LEVEL3
3 times blink
7 times repeat
Lighting
CAUTION
GENUINE SUZUKI ACCESSORIES
LEVEL2
2 times blink
7 times repeat
Lighting
19/20
MIN
LEVEL1
1 time blink
7 times repeat
Lighting
Publicidad
