Be Cool Pick Up Manual Del Usuario página 17

GB
next to the seat belt buckle (Figure 10).
2.3. Ensure that no part of the seat belt has
become twisted or trapped and that the
car seat's fabric cover is not impeding the
movement or correct fitting of the seat belt .
3. Ensure that the diagonal belties gently on
the child's shoulder and the lap belt is worn
over the hips . Tighten the diagonal section
of the seat belt by pulling it upwards until
there is no slack and the belt holds the child
firmly in place (Figure 11).
4. To take the child out of the seat, simply
unfasten the seat belt and undo the shoul-
der belt guide.
Adjusting the low-back rest
There are three adjustable positions for the
low-back rest of Pick Up.
To adjust the low-back rest of the Pick Up, just
simply pull or push the top part of the low-
back rest, you can hear the clicking voice from
the position to position. When in locking posi-
tion, the low-back rest will not falling off, so
you can make the installation for next step.
Caution: Unoccupied Pick Up car seats s
hould still be secured in place by the vehicle's
adult seat belt (and Isofix con-nectors where
applicable).
Caution: Make sure luggage or other objects
are properly secured.
Caution: Make sure the belt is not twisted.
Caution: The lap belt should be worn over the
hips. Figures 12 & 13
Removing the cover for washing
The Pick Up car seat's cover is also a safety
feature. Never use the Pick Up car seat with-
out its cover.
Before removing the cover from the seat, you
need to remove the low back rest from the
base first, by lying the low back rest down and
take it off from the base.
- Low back rest - Remove the plastic cover in
the rear side of the back rest, and remove the
elastic band from the hook, then take the in-
sert cushion off from the low back rest.
- Booster cushion - Remove the covers by pulling
the edges of upholstery from the gap between
upper base and lower base, simply pull the cover
forward and upward.
17