Eton SOLARLINK FR600 El Manual Del Propietario página 8

RECEPTION OF WEATHER FREQUENCIES
To hear your local weather station, pull up the antenna, turn
on the radio and select WB with the band selector. Turn up the
volume and press the buttons to hear all 7 weather channels.
You'll probably only hear one channel, but if you hear a weather
broadcast on more than one, select the strongest. The strongest
one will usually be your local weather station. Below are the
frequencies that correspond to the radio's channels:
Channel 1 162.400 MHz
Channel 2 162.425 MHz
Channel 3 162.450 MHz
Channel 4 162.475 MHz
Channel 5 162.500 MHz
Channel 6 162.525 MHz
Channel 7 162.550 MHz
SETTING TO RECEIVE WEATHER ALERTS
Weather alerts are received in three ways:
1. Alert indicator light is on.
2. Alert forecast appears in the display.
3. Alert bell rings.
To set the channel for receiving alerts, use the method below and
set it to your strongest channel.
1) Revolve the <Band Selecting Knob> to "OFF" position.
2) Press <MENU> button shortly to enter the setting menu.
3) Press <> or <> shortly to select "WEATHER" option.
14
SOLARLINLK FR600 OWNER'S MANUAL
4) Press <SELECT> shortly once to enter the weather setting
mode.
5) Press <> or <> shortly to select the strongest weather
channel (CH1~7).
6) After setting, press <SELECT> shortly to save.
SETTING ALERT MODE
1) Revolve the <Band Selecting Knob> to "OFF" position.
2) Press <MENU> button shortly to enter the setting menu.
3) Press <> or <> shortly to select "ALERT MODE" option.
4) Press <SELECT> shortly once to enter the alert mode setting
mode.
5) Press <> or <> shortly to select the alert mode (SIREN &
VOICE).
Note: The selected alert mode will appear in the display.
6) After setting, press <SELECT> shortly to save.
SOLARLINLK FR600 OWNER'S MANUAL
15