Operating With The Remote Control; Switching The Input Mode; Adjusting The Volume; Displaying The Black Screen And Turning Off The Sound Temporarily - Sharp TL-M5200 Guia Del Usuario

Operating with the Remote Control

Switching the input mode

Select the appropriate input mode for the connected
equipment.
Press COMPUTER (1/2), DVI, HDMI, S-VIDEO or
VIDEO to select the input mode.
• When you press INPUT on the monitor, the
INPUT list appears.
Press ▲/▼ to switch the input mode.

Adjusting the volume

Press VOL +/– to adjust the volume.
• You can also adjust the volume using VOL +/– on
the monitor.
Note
• Pressing VOL– will lower the volume.
• Pressing VOL+ will raise the volume.
• You can set the volume to different levels for each input
source.
• To adjust sound via the audio output terminal (MONITOR
OUT), set "Audio Output" to "VAO" in the "Option" menu.
(See page 40.)
Displaying the black screen
and turning off the sound
temporarily
Press AV MUTE to temporarily display a black
screen and turn off the sound.
AV MUTE
Note
• Pressing AV MUTE again will turn the image back on.
24
25
COMPUTER (1/2), DVI, HDMI,
S-VIDEO, VIDEO buttons
AV MUTE button
VOL (Volume) buttons (+/-)