Microphone Mixing; Playing The Microphone Sound Through The Speakers - JVC MX-K30 Manual De Instrucciones

Consiste de ca-mxk30, y sp-mxk30. consiste de ca-mxk10, y sp-mxk10
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To Apply Digital Echo
Press the ECHO button on the Remote Control.
The Echo indicator ( ) comes on.
To cancel the ECHO, press the ECHO button again. The Echo
indicator goes off.
No echo is applied.
• To prevent howling and squealing (feedback) when using
the microphone, adjust the volume properly. Also, try to
avoid to pointing the microphone towards the speaker.
To Record Your Singing
1
Follow the steps in "Singing Along with
Karaoke" above.
2
Prepare a tape and source, then press the
REC START/STOP button on the Unit.
For details, see "Standard Recording" on page 18.

Microphone Mixing

When using special Karaoke sources for Karaoke, use the follow-
ing procedure.
1
Turn the MIC LEVEL control on the Unit to
MIN.
2
Connect a microphone by plugging it into the
MIC jack.
3
Start a source CD, tape, or other equipment.
4
Adjust the volume, as you sing into the
microphone.
To adjust the volume, use the MIC LEVEL control and VOL-
UME control on the Unit or the VOLUME +,- button on the
Remote Control.
• When you want to apply echo to the microphone, press
ECHO button on the Remote Control. The Echo indicator
( ) will come on.
To Record Microphone Mixing
1
Follow the steps in "Singing Along with
Karaoke" above.
2
Prepare a tape and source, then press the
REC START/STOP button on the Unit.
For details, see "Standard Recording" on page 18.
Playing the Microphone Sound
through the Speakers
You can directly output the microphone sound from the speakers.
1
An echo is applied.
2
3
Recording from the Microphone
1
2
Turn the MIC LEVEL control on the Unit to
MIN.
Connect a microphone by plugging it into the
MIC jack.
Adjust the volume, as you sing into the
microphone.
To adjust the volume, use the MIC LEVEL control and VOL-
UME control on the Unit or the VOLUME +,- button on the
Remote control.
• When you want to apply echo to the microphone, press
ECHO button on the Remote Control. The Echo indicator
( ) will come on.
Follow the steps in "Singing Along with
Karaoke" above.
Prepare a tape and source, then press the
REC START/STOP button on the Unit.
For details, see "Standard Recording" on page 18.
Using the Microphone
26

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mx-k10

Tabla de contenido