Device Elements; Start Up; Power Connection; Operation - Kärcher IVC 60/30 Tact2 Lp Manual De Instrucciones

Ocultar thumbs Ver también para IVC 60/30 Tact2 Lp:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36

Device elements

1 Tension lever
2 Filter cover
3 Flat fold filter
4 Left unlocking of the placement me-
chanics
5 Suction head
6 Nameplate
7 Power cord
8 Right unlocking of the placement me-
chanics
9 Tin tub
10 Disposal system
11 Sheathed cable
12 Handle of the disposal system
13 Intermediate ring
14 Suction head lock
15 Waste hose
16 Steering roller of the chassis with park-
ing brake
17 Floor nozzle holder
18 Chassis
19 Drain pan
20 Suction support
21 Holder for suction pipe
22 Handle of the suction head

23 Rotating knob

24 Torque motor
25 Exhaust muffler
26 Push handle
27 Cable hook

Start up

 Bring the appliance to working position
- secure it, if required, with parking
brakes.
 Insert the suction hose (not included)
into the suction hose connection.
 Ensure that the disposal system has
been inserted properly.
 Attach the desired accessories (not in-
cluded).

Power connection

ATTENTION
Check direction of rotation of the engine at
every socket change.
Note: With correct direction of rotation a
strong airflow can be felt out of the opening
of the exhaust muffler. Air is suctioned with
incorrect rotation direction.
Illustration
 Check the direction of rotation of the
motor. Exchange the poles on the appli-
ance plug if the rotation direction is
wrong.
Inserting the waste hose
 Remove all 4 loops of the waste hose
(length: 22 m).
Illustration
 Open the intake by a rotation to the left
and pull it out towards the bottom.
 Insert the waste hose as shown in the il-
lustration.
 Insert the intake and lock it by clockwise
rotation.
Illustration
 Pull down the waste hose 40-50 cm.
 Close the end of the waste hose by
means of a cable tie.
ATTENTION
Risk of damage! Do not cover the supply
and exhaust air openings on the suction
head.
ATTENTION
The two flat fold filters must never be re-
moved during vacuuming.
– 2
EN

Operation

Rotating knob
– Appliance ON
– Filter dedusting OFF
– Appliance OFF
– Appliance ON
– Filter dedusting ON
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

15761150

Tabla de contenido