Operation - Mettler Toledo M400 Guía De Instalación Rápida

1

Operation

Entry of data values, selection of data entry options
Use the
in a selection of values or options of a data entry field.
Note: Some screens require configuring multiple values via the same data field (ex: configuring
multiple setpoints). Be sure to use the
or
Navigation with
If a
or
(go back one screen). This can be a very useful option to move back up the menu tree without
having to exit into the measuring mode and re-enter the menu.
Exit menu
Note: Exit the menu at any time by pressing the
The transmitter returns to the Measurement mode.
"Save changes" dialog
Three options are possible for the "Save changes" dialog:
– "Yes & Exit": Save changes and exit to measuring mode
– "Yes & ":
– "No & Exit": Don't save changes and exit to measuring mode
The "Yes &
re-enter the menu.
4
key to increase or the
key to toggle between all configuration options before entering to the next display screen.
in Display
is displayed on the bottom right hand corner of the display, you can use the
key to navigate to it. If you click [Enter] you will navigate backwards through the menu
Save changes and go back one screen
" option is very useful if you want to continue configuring without having to
key to decrease a digit. Use the same keys to navigate with-
or key to return to the primary field and the
and key simultaneously (ESCAPE).