Operation; General Setup - Mettler Toledo 6000TOCi Guia De Inicio Rapido

9 Operation

Navigating the Menu Tree
To browse through the menus, touch the open arrows > and/or <.
To access a menu press the corresponding arrow c in the same line.
Exit a Menu
Press p to exit the menu.
Press H to return to the Measurement Screen.
Return to the Measurement Screen
Press H to return to the Measurement Screen.
Press s to logout from the transmitter.
Entry of Data
The M800 displays a keypad for modifying values.
Press the e button and the transmitter will store the new value.
Press the "ESC" button to exit the keypad without changing data.
Selection Menus
Some menus require a selection of a parameter/data. In this case the transmitter dis-
plays a pop up window. Press the according field to select the value. The pop window
will be closed and the selection will be stored
"Save changes" Dialog
If the M800 brings up the "SAVE CHANGES" dialog there are the following options.
"NO" will discard the entered values and exit the menu, "YES" will save changes made
and "CANCEL" will return to the menu to continue configuring.
10 General Setup (PATH: C/Guided Setup)
10
From the main screen, press the Configure icon (C)
and select Guided Setup. From this screen, you will be
able to select and configure the first measurement from
the 6000TOCi that will be displayed by the M800, and
configure and activate an analog output and/or set point
to be associated with this measurement.
Analog outputs
By selecting Yes the linear 4-20 mA analog output Aout1
will be set up for measurement 1 when e is pressed.
Selecting No will deactivate the analog output. Aout1
min, Aout1 max are the minimum and maximum mea-
surement values for the 4 and 20 mA values respec-
tively. Additional options may be configured from the
analog output configuration menu.