Preparation; Commissioning; Inserting Printing Cartridge - Reiner speed-i-Jet 798 Instrucciones De Empleo Breves

speed-i-Jet 798

1. Preparation

1.1. Commissioning

The rechargeable batteries must be charged completely before the first use.
The charging time is approx. 3 hours. The rechargeable batteries are charged when the
green charge display
Insert batteries Fig.

Open battery compartment
f
Ensure correct polarity and insert batteries.
f
Close battery compartment
f
Charge batteries

Charging at a USB hub without dedicated power supply is not possible.
Connect the mini-USB-sockes
f
The green charging indicator

1.2. Inserting Printing Cartridge

The print-head needs to be changed when the print-out becomes weak and
incomplete.
CAUTION
Health risks if ink is swallowed.
Don't swallow!
f
Keep cartridge out of the reach of children!
f
Inserting printing cartridge
Remove protective cap
f
Open print-head flap
f
Take the new cartridge
f
4
nozzles or clip.
When using standard ink hold the small felt pad
f
4
nozzles until some ink appears on the felt.
Inserting print cartridge
f
Close print-head flap
f
6
goes out.
B
5
.
5
.
Fig. C
9
with the PC via the USB cable.
6
lights up.
Fig. A +

2
.
3
.
11
from its packaging and remove the protective film
11
.
3
.
C + E
13
that is provided, against the cartridge
GB
14
from
14