Conceptronic CM3H Manual Del Usuario página 20

ENGLISH
Connection example, showing a HDMI, Composite and S/PDIF connection.
Connecting the Video Cable(s)
You can connect the unit in 4 different ways to your TV:
- HDMI
- Composite
- SCART (by using the Composite cable & Scart adapter)
- Component **
** When using Component, only the video signal is send to your TV or monitor.
For the audio signal, use the Audio RCA Jacks on the Composite cable (Red, White).
HDMI:
• Connect the HDMI cable to the HDMI output [7] on the unit.
• Connect the other side of the HDMI cable to the HDMI input on your TV.
Composite:
• Connect the Composite cable (Yellow, Red, and White) to the corresponding Composite jacks [11 , 12 ,
13] on the unit.
• Connect the other side of the Composite cable (Yellow, Red, and White) to the Composite input jacks on
your TV.
SCART:
• Connect the Composite cable (Yellow, Red, and White) to the corresponding Composite jacks [11 , 12 ,
13] on the unit.
• Connect the other side of the Composite cable (Yellow, Red, and White) to the jacks on the SCART
Adapter.
• Connect the SCART Adapter to the SCART input on your TV.
Component:
• Connect the Component Cable (Red, Green, and Blue) to the Component jacks [8, 9, 10] of the unit.
• Connect the other end of the Component cable to the Component input jacks on your TV.
6. Connecting your CM3H
HDMI connection
S/PDIF connection
Composite + SCART connection
20