DANA Spicer 360A10 Manual De Servicio página 48

REPLACING PISTON SEALS - SOSTITUZIONE GUARNIZIONI PISTONE - KOLBENDICHTUNGEN AUSWECHSELN - SOSTITUCION GUARNICION
ASSEMBLY
13
14
16
GB
Fit O-ring (14) to piston (13) and lubricate both seal and piston (13)
with oil. Introduce piston (13) into cylinder (16) and fork (10); fit O-
ring (15) and insert piston fully.
8
GB
Apply Loctite 510 to the surface of shaft support (5), install the
complete cylinder (8) and clamp with screws (7), tightening to 25±
26 Nm.
GB
PISTON - REMPLACEMENT DES JOINTS DU PISTON
15
10
DNF00740
a
7
5
DNF00770
c
e
48
10
9
GB
Fasten piston (13) and fork (10) with spring pin (9).
Apply Loctite 510 to the surface of the cylinder, fit the cover (12)
and lock it with screws (11) tightening to a 25±26 Nm.
17
6
18
GB
Install the coupling-detecting microswitch (6) complete with O-ring
(17) and distance piece (18); tighten microswitch to a 54 Nm torque.
GB
11
13
12
DNF00750
b
DNF00760
d
f